1. <strike id="sq06s"></strike>

          當前位置:首頁   >    產品中心   >    耐電痕化指數試驗儀   >    漏電起痕試驗儀   >   漏電起痕試驗儀 廠家 產品展示

          漏電起痕試驗儀 廠家

          型 號

          更新時間2023-08-04

          廠商性質生產廠家

          報價

          產品描述:漏電起痕試驗儀適用于照明設備、低壓電器、家用電器、機床電器、電機、電動工具、電子儀器、電工儀表、信息技術設備的研究、生產和質檢部門,也適用于絕緣材料、工程塑料、電氣連接件、輔件行業。

          產品概述

          漏電起痕試驗儀由北京北廣精儀儀器設備有限公司按照國標(GB4207、IEC60112)精密生產。

          本產品名稱:漏電起痕試驗儀,耐漏電起痕試驗儀,相比漏電起痕指數 (或稱相對漏電起痕指數)

          型號:BDH   適用標準有:GB/T4207、GB4706.1 ASTM D 3638-92、IEC60112 、UL746A 

          需要請致電詳談:北京北廣精儀儀器設備有限公司

          一、本儀器技術參數:

          1、空氣環境:0~40°C;

          2、相對濕度:≤80%;

          3、無明顯振動及腐蝕性氣體的場所;

          4、工作電壓:AC220V±2% 50HZ±1%,1KVA;

          5、試驗電壓:100~600V連續可調數顯,電壓表顯示值zui大誤差:1.5%,顯示值為:r.m.s;

          6、延時電路:試驗回路在(0.5±10%)A(r.m.s)或更大電流時延時(2±10%)S后動作;

          7、電極:

          a: 5㎜×2㎜矩形鉑金電極和黃銅電極各一對;

          b: 電極符合IEC60112的尺寸要求:(5±0.1)㎜×(2±0.1)㎜×(≥12)㎜,其中一端鑿尖角度為(30±2)°(即試驗端呈30°±2°斜角),鑿尖平面寬度為0.01㎜~0.1㎜;

          c: 電極間所成角度為60°±5°,間距為(4±0.1㎜);

          d: 對樣品壓力為:1.00N±0.05N;

          8、滴液系統:

          a: (30±5)秒(開啟滴液時間28S+開啟滴液持續時間2S)自動計數、數顯(可預置),50滴時間:(24.5±2)min;

          b: 滴液針嘴到樣品表面高度:35㎜±5㎜(附一個量規作測量參考);

          c: 滴液重量:20滴:0.380g~0.489g;50滴:0.997g~1.147g;

          9、短路電流:兩電極短路時的電流可調至(1±0.1)A,數顯±1%,電流表顯示值為有效值(r.m.s);

          10、儀器外形尺寸(寬*高*深):1100*1150*550㎜(0.5立方);

          1:700*385*1000㎜(0.1立方);

          箱體由1.2厚的304不銹鋼板制成,可訂制0.75立方;

          11、樣品支撐平板:厚度≥4㎜的玻璃;

          12、針嘴外徑:A溶液:0.9㎜~1.2㎜

          B溶液: 0.9㎜~3.45㎜

          滴液大小根據滴液系統而定;

          13、風速:0.2M/S。

          二、本儀器主要用途:

          漏電起痕試驗儀適用于照明設備、低壓電器、家用電器、機床電器、電機、電動工具、電子儀器、電工儀表、信息技術設備的研究、生產和質檢部門,也適用于絕緣材料、工程塑料、電氣連接件、輔件行業。

          三、漏電起痕試驗儀:

          1.工作電源:AC220V±5[%] 50HZ±1[%],1KVA;

          2.試驗電壓: 100~600V連續可調數顯;

          3.延時電路:試驗回路在0.5A或更大電流時延時2秒后動作;

          4.電極:5mmX2mm矩形鉑金電極和黃銅材料各一對,每個電極對試樣的壓力可調整(1N±0.05N);

          5.兩電極間距4±0.1mm;

          6.滴液間隔:30±5秒(開啟滴液時間28S+開啟滴液持續時間2S) 自動計數 、數顯(可預置);

          7.短路電流:兩電極短路時的電流可調至1±0.1A,數顯±1[%];

          8.操作箱體積:0.1立方、0.5立方、0.75立方。

          四、本儀器特點:

          CTI是判斷絕緣材料相比電痕化指數,滿足DIN EN60112標準。 CTI模擬跟蹤絕緣材料間通過兩電極間滴液的電流。通常使用的絕緣材料可能暴露在潮濕或者有塵埃的環境中,如果在傳導的情況下,可能引起重壓或者火災的危險。本部分滿足DIN EN 60 112 / IEC 60 112 / 或者 VDE 0303 *部分。 測試滿足KA方法 (滴落物的數量 / 爬行者通道深度)和KA方法(直到第50滴滴液的電壓)。 CTI 和 PTI值將能夠確定。 組合允許進行微調測試電壓、測試電流、開關時間、滴液大小和滴落數量。

           

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

             
             
             

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

             
             
             

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

             
             
             

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume

             
             
             

          compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 dro

             
             
             

          ps: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

             
             
             

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate t

          he solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (

          attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution

           

          B: 0.9 mm to 3.45 mm

           

           

          Droplet size may be under the drip system;

           

           

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test v

          oltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:

           

          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.

           

          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.

           

          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.

           

          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.

           

          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.

           

          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.

           

          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.

           

          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A

           

          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.

           

          First, the technical parameters of the instrument:

           

          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.

           

           

           

          Second, the main purpose of this instrument:

           

          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.

           

          Third, tracking tester:

           

          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.

           

          Fourth, this instrument features:

           

          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.

           

          Fifth, the instrument needs to pay attention to:

           

          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.

           

          Six, Test principle:

           

          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).

           

          Seven, test purposes:

           

          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.

           

           

          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          Tracking tester by Beijing North Canton Precision Instrument Equipment Co., Ltd. in accordance with the national standard (GB4207, IEC60112) precision production, instrument quality, impeccable. After the sale and a professional engineer onsite training debugging. Until the client to understand the instrument so far.

          The product name: Tracking tester, resistance to tracking tester, comparative tracking index (or called comparative tracking index). Model: BDH Applicable standards: GB/T4207, GB4706.1 ASTM D 3638-92, IEC60112, UL746A


          Need to go into the details, please call: Beijing North Canton Precision Instrument Co., Ltd.


          First, the technical parameters of the instrument:


          1, the air environment: 0 ~ 40 ° C;

          2, relative humidity: ≤ 80%;

          3, no vibration and corrosive gases;

          4, Working voltage: AC220V ± 2% 50HZ ± 1%, 1KVA;

          5, the test voltage: 100 ~ 600V continuously adjustable digital display, voltage table shows the maximum error: 1.5%, the displayed value: rms;

          6, the delay circuit: test circuit in (0.5 ± 10%) A (rms) or greater current delay (2 ± 10%) S after the action;

          7, the electrode:

          a: 5 mm × 2 mm rectangular platinum electrodes and brass electrodes of one pair;

          b: IEC60112 electrodes meet the dimensional requirements: (5 ± 0.1) mm × (2 ± 0.1) mm × (≥ 12) mm, one end of the chisel tip angle of (30 ± 2) ° (ie test side was 30 ° ± 2 ° angle), flat chisel tip width of 0.01 mm to 0.1 mm;

          c: the angle formed between the electrodes of 60 ° ± 5 °, a pitch of (4 ± 0.1 mm);

          d: the sample pressure: 1.00N ± 0.05N;

          8, drip systems:

          a: (30 ± 5) seconds (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset), 50 drops of time: (24.5 ± 2) min;

          b: drip needle tip to the sample surface height: 35 mm ± 5 mm (attach a gauge for measuring the reference);

          c: Drip Weight: 20 drops: 0.380g ~ 0.489g; 50 drops: 0.997g ~ 1.147g;

          9, short-circuit current: two electrodes short-circuit current is adjustable to (1 ± 0.1) A, digital display ± 1%, RMS current meter display value (rms);

          10 Instrument Dimensions (W * H * D): 1100 * 1150 * 550 mm (0.5 cubic meters);

          1:700 * 385 * 1000 mm (0.1 cubic meters);

          Case from 1.2 thick 304 stainless steel, can be customized 0.75 cubic meters;

          11, the sample support plate: thickness ≥ 4 mm glass;

          12, needle diameter: A solution: 0.9 mm to 1.2 mm

          Solution B: 0.9 mm to 3.45 mm

          Droplet size may be under the drip system;

          13, wind speed: 0.2M / S.




          Second, the main purpose of this instrument:


          Tracking test apparatus for lighting equipment, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, research, production and quality control departments, but also for insulation, plastic , electrical connectors, accessories and parts industry.


          Third, tracking tester:


          1 Power Supply: AC220V ± 5 [%] 50HZ ± 1 [%], 1KVA;

          (2) Test voltage: 100 ~ 600V continuously adjustable digital display;

          3 delay circuit: Test circuit current at 0.5A or greater delay 2 seconds after the action;

          4 Electrode: 5mmX2mm rectangular brass platinum electrodes and each one pair of each electrode on the sample pressure adjustable (1N ± 0.05N);

          5 two electrode spacing 4 ± 0.1mm;

          6 Drip interval: 30 ± 5 sec (open drip drip time 28S + open duration 2S) automatic counting, digital display (can be preset);

          7 Short circuit current: two electrodes short-circuit current is adjustable to 1 ± 0.1A, digital display ± 1 [%];

          8 Operation box volume: 0.1 cubic meters, 0.5 cubic meters, 0.75 cubic meters.


          Fourth, this instrument features:


          CTI is compared to determine the insulation material tracking index, meets DIN EN60112 standards. CTI tracing simulation by an insulating material between two electrodes of the current drops. Usually the insulating material may be exposed to a humid environment or the dust, if the transmission case, it may cause a fire hazard, or stress. This section meets DIN EN 60 112 / IEC 60 112 / VDE 0303 or the first part. Test methods to meet the KA (drip quantity / Crawler channel depth) and KA methods (50 drops of liquid until the voltage). CTI and PTI values ??will be able to determine. Combination allows for fine-tuning the test voltage, test current, the switching time, the size and drip drip quantity.


          Fifth, the instrument needs to pay attention to:


          1, during operation, personnel should pay attention to personal protection, to avoid leakage injured or contaminated solution to the mouth, eye damage parts

          2, the input power supply AC220 ± 2%.

          3, the exhaust pipe should pass out of the window.

          4, in the sample, do not open the doors, to be tested after completing the experimental failure or when the fire generated smoke, first turn on the fan exclude smoke, then open the doors for the job.

          5, before the experiment required to confirm whether the device is in the measurement period, such experiments can not be extended

          6, power supply applications with ground three pole socket, to ensure reliable grounding.


          Six, Test principle:


          On the surface of the solid insulating material, the required size (2mm × 5mm) between platinum electrodes, - applying a voltage and a time (30s) given height (35mm) drop required volume of conductive liquid droplet (0.1% NH 4CL) to evaluate the solid insulating material surface in wet or contaminated medium electric and combined effects of the anti-leakage performance, measured comparative tracking index (CT1) and the proof tracking index (PT1).


          Seven, test purposes:


          Proof tracking test is to simulate the actual use of household products in the live parts of different polarity in the insulating material is deposited on the surface of a conductive material caused by insulation material surface creepage breakdown short circuit and fire hazard testing carried out. Electrical products in use, due to environmental causes dye hollow of a tree surface of insulating material with dirt, moisture and the leakage, thereby inducing the corrosion damage the insulation properties. Tests specified in this standard is an extremely harsh conditions simulated acceleration tests to verify whether the formation of an insulating material signs of leakage, which can distinguish solid insulating materials in a short anti-tracking ability, to ensure that products in certain environmental conditions safe use.



          Other additional description:


          Tracking (Tracking): solid insulating material surface and the electrolyte in the electric field under the combined effects of the gradual process of forming a conductive path.


          Proof Tracking Index Proof Tracking Index (PTI): In 30 seconds the material surface to withstand a drop rate of 50 drops of the role of the electrolyte to form a permanent conductive carbon path required voltage to V represents.


          Polymeric electrically insulating material has a special destruction phenomenon that polymeric insulating material surface may occur under certain conditions-tracking degradation phenomenon, and can lead to damage to tracking. Tracking damage is present on the surface when the material is wet and dirty, the electric field is large enough, the surface leakage current will be generated, when the current under the action of Joule heat, water is evaporated, the separation film surface with a gap formed (called the drying belt), the drying belt to instantaneous field strength between the film reaches the discharge field strength which causes discharge, the discharge surface of the heat generated by partial carbonization material, high conductivity of the carbonization product, where the electric field density is concentrated to the carbonization section, causing the repeated discharge, around which produce more carbides, carbonized conductive path is formed, extending in a direction to the electrodes, resulting in a short circuit.


          Sample thickness

          GB/T4207-2003 requirements, the specimen thickness of not less than 3 mm, as is usually the case that the sample pad under glass or steel, because the test ionization NH4Cl solution will produce a lot of heat, heat the sample must withstand case, if the sample on the sample is too thin will quickly transfer heat away, would not achieve the specimens withstand the effects of ionizing NH4Cl solution. Therefore, the test specimen should be to ensure thickness of not less than 3 mm, the sample should be used the same material superimposed manner, the sample thickness of not less than 3 mm. Meanwhile superimposed sample size should be as consistent.


          Distilled or deionized water resistivity

          GB/T4207-2003 specified in distilled or deionized water with a prepared solution of NH4Cl, the resistivity of the solution (395 ± 5) Au · cm. However, the standard does not specify distilled or deionized water resistivity. I obtained in the long term test, distilled or deionized water may affect the resistivity of experimental results, the results of the test voltage is reduced. Because distilled or deionized water resistivity is low, it means distilled or deionized water containing negligible like ions, these impurity ions affect dubbed NH4Cl solution NH4 + and Cl-, and even accelerated NH4Cl solution ionized. Distilled or deionized water, the higher the resistivity, distilled or deionized water contains less impurity ions, the impact on the test results is smaller. From the author of a large number of experimental results, distilled or deionized water resistivity of not less than 10 M Europe · cm, thereby controlling distilled or deionized water impurity ions on the test results.


          Short-circuit current test set

          GB/T4207-2003 provides short-circuit current test before the test should be set to 1 A. Well here there are two possibilities:

          (A) different test voltage is only set once short-circuit current;

          (2) be set individually for each test voltage short circuit current. For different test voltage is only set once short-circuit current, for example, the test voltage is 200 V, short-circuit current to 1 A, then the test voltage is increased to 300 V, and then verify that the short circuit current, can be found in the current exceeds 1 A. If the test voltage is reduced to 150 V, the validation circuit current, you will find current of less than 1 A. So as to ensure compliance testing standards, adjusted once each test voltage, short-circuit current should be adjusted again.


          Droplet size control amount

          GB/T4207-2003 predetermined amount of liquid droplets in the size should be controlled at 44 drops / ml to 45 drops / ml. In the experiment, the number of drops can be controlled by a droplet counter, then how to determine the 44 drops to 45 drops is 1 mL it? The author summarizes a simple and effective method. NH4Cl solution, the percentage concentration of 0.1%, NH4Cl amount is small, then the density of the solution can be set to 1 g / mL. The solution was poured into a dropping vessel, a small container with a first weight of the empty container weighed, and the small container in the drip device, to accommodate the droplets. Start the instrument, drop out of NH4Cl solution 44 drops to 45 drops, and then weighed small container weight. Subtract two weights can be drawn after 44 drops to 45 drops of liquid droplets weight. If the weight is 1 g, it shows 44 drops to 45 drops of the solution was 1 ml; if more than 1 g, it shows excessive droplets, droplet volume should be adjusted to delay; if less than 1 g, it shows the amount of droplets too small, the amount of liquid droplets can be adjusted delay. This ensures that the droplet size of the volume compliance.


          Clean the electrodes

          GB/T4207-2003 states: test response electrode for cleaning. This means that after each do a test, the electrodes should be cleaned, whether it is at the same voltage or different voltages. Cleaning can use detergents, alcohol, etc. can also be used for cleaning, but may not use abrasive cleaners. After cleaning, apply NH4Cl solution was prepared using deionized or distilled water if the test sample combustion occurs, making the platinum electrode melting, then the electrodes should be trimmed. Dressing available when more than 1200 mesh sandpaper lightly polished on the part of the ablation to remove traces of ablation. Polished should be very careful not to change the outline of the electrodes, the electrode should be kept constant angle R of the blade, does not change the cylindrical surface of the electrode edge, the state should remain sharp, but not sharpened.

          留言框

          • 產品:

          • 您的單位:

          • 您的姓名:

          • 聯系電話:

          • 常用郵箱:

          • 省份:

          • 詳細地址:

          • 補充說明:

          • 驗證碼:

            請輸入計算結果(填寫阿拉伯數字),如:三加四=7
          聯系人:陳丹
          手機:
          18911395947
          點擊這里給我發消息
           
          影音先锋中文字幕人妻,日韩精品无码一区二区三区不卡,99久久99久久精品免费看蜜桃,中文字幕乱码人妻一区二区三区
          国产精品对白刺激久久久 国产精品99久久精品爆乳 国产精品VA在线观看无码不卡 成人区人妻精品一区二区不卡网站 久久亚洲AV永久无码精品 久久久无码一区二区三区 亚洲精品乱码久久久久久按摩 HD老熟女BBN老淑女 亚洲熟妇av一区二区三区 国内揄拍国内精品少妇国语 丰满人妻熟妇乱又伦精品软件 久久久久夜夜夜精品国产 丰满少妇作爱视频免费观看 亚洲国产精品无码久久久秋霞1 精品久久久久久国产 制服 丝袜 亚洲 中文 综合 免费 成 人 黄 色 在线观看 久久久久亚洲AV成人片 欧美精品九九99久久在免费线 性色AV一区二区三区天美传媒 激情综合色五月丁香六月欧美 欧洲熟妇色XXXX欧美老妇软件 巨大欧美黑人XXXXBBBB 亚洲人成色777777在线观看 成熟丰满熟妇高潮XXXXX 无码人妻精品一二三区免费 精品人妻VA出轨中文字幕 亚洲A∨无码一区二区三区 精品久久久久久无码免费 HD老熟女BBN老淑女 亚洲熟女综合色一区二区三区 色综合久久久久久久久五月 99久久国产综合精品成人影院 高潮毛片无遮挡高清免费 精品久久久久久久无码人妻热 精品无码AV一区二区三区 亚洲AV无码片VR一区二区三区 最近最新高清中文字幕 一本大道AV伊人久久综合 亚洲午夜精品久久久久久浪潮 激情综合色五月丁香六月欧美 少妇性饥渴无码A区免费 麻豆一区二区99久久久久 欧洲多毛裸体xxxxx 日日噜噜夜夜狠狠久久AV 国产男女爽爽爽免费视频 亚洲国产精品国自产拍AV 日韩人妻精品一区二区三区视频 HD老熟女BBN老淑女 精品久久香蕉国产线看观看亚洲 男人添女人下部高潮视频 亚洲国产精品一区二区WWW HD老熟女BBN老淑女 99精品久久久久久久婷婷 精品国产一区二区三区AV 免费 成 人 黄 色 在线观看 久久久久久久亚洲AV无码 人妻熟妇乱又伦精品视频APP AV无码久久久久久不卡网站 亚洲成AV人综合在线观看 亚洲人成色777777在线观看 色综合久久88色综合天天 国产特级毛片AAAAAAA高清 人妻少妇精品中文字幕AV 国偷自产一区二区免费视频 亚洲AV无码国产精品夜色午夜 欧洲AV无码放荡人妇网站 人妻少妇精品中文字幕AV 亚洲综合AV一区二区三区 体验区试看120秒啪啪免费 暴力调教一区二区三区 午夜精品久久久久久久久 亚洲国产精品久久久久久 暴力调教一区二区三区 情侣黄网站免费看 最近最新高清中文字幕 精品久久久久久久无码人妻热 国产波霸爆乳一区二区 亚洲精品无码永久在线观看 精品久久久久久久无码人妻热 欧美精品色婷婷五月综合 亚洲AV无码成人黄网站在线观看 色偷偷88888欧美精品久久久 国产精品对白刺激久久久 欧洲专线一区二区三区 色噜噜狠狠色综合日日 日韩毛片无码永久免费看 国产精品99久久精品爆乳 亚洲AV综合AV一区二区三区 欧美XXXX做受老人 亚洲AV无码一区二区二三区入口 亚洲AV中文无码乱人伦在线咪咕 中文字幕色AV一区二区三区 精品久久久久久无码国产 欧洲熟妇色XXXX欧美老妇软件 中文字幕色AV一区二区三区 精品人妻无码区二区三区 亚洲色大成网站WWW久久九九 午夜精品久久久久久久久 精品人妻大屁股白浆无码 亚洲AV无码国产精品夜色午夜 40岁成熟女人牲交片20分钟 国产手机在线精品 少妇性饥渴无码A区免费 亚洲熟妇AV一区二区三区 国产熟女高潮视频 久久久久亚洲精品男人的天堂 亚洲熟妇少妇任你躁在线观看无码 欧美精品色婷婷五月综合 色欲国产麻豆一精品一AV一免费 精品无码人妻一区二区三区不卡 丰满人妻熟妇乱又伦精品软件 一本一本大道香蕉久在线精品 中文字幕乱码人妻综合二区三区 日产精品久久久久久久性色 久久久久亚洲精品男人的天堂 久久精品国产99国产精品导航 JZZIJZZIJ亚洲乱熟无码 久久久久久AV无码免费网站下载 精品人妻VA出轨中文字幕 久久99精品久久久久久无毒不卡 国产精品VIDEOSSEX久久 亚洲熟女WWW一区二区三区 69久久夜色精品国产69 中文字幕乱码人妻综合二区三区 国产精品视频一区二区噜噜 精品久久久噜噜噜久久久 人人妻人人添人人爽欧美一区 无码免费一区二区三区免费播放 久久久久亚洲AV成人无码网站 精品久久久久久无码免费 色欲AV人妻精品一区二区直播 国产精品videossex久久 久久久久久久精品国产亚洲 无码人妻一区二区三区免费视频 成年丰满熟妇午夜免费视频 国偷自产一区二区免费视频 亚洲国产欧美一区二区三区 久久亚洲AV永久无码精品 中文字幕色AV一区二区三区 亚洲国产精品国自产拍AV 精精国产XXXX视频在线播放 一本大道AV伊人久久综合 亚洲熟妇少妇任你躁在线观看无码 性色AV一区二区三区天美传媒 体验区试看120秒啪啪免费 97人人模人人爽人人少妇 人妻少妇精品久久久久久 国产精品视频一区二区噜噜 精品国产精品国产偷麻豆 色综合久久88色综合天天 国产小呦泬泬99精品 国产精品对白刺激久久久 精品久久久久久无码国产 人人做天天爱夜夜爽 亚洲AV日韩AV永久无码下载 CHINESE熟女熟妇2乱 丰满人妻熟妇乱又伦精品软件 国产精品亚洲一区二区三区 精品久久香蕉国产线看观看亚洲 国产欧美久久久久久精品一区二区 99精品久久久久久久婷婷 国产精品VA在线观看无码不卡 亚洲AV综合AV一区二区三区 丰满人妻熟妇乱又伦精品软件 69久久夜色精品国产69 国产一区二区精品久久岳 最近最新高清中文字幕 国产精品无码不卡一区二区三区 色欲AV无码一区二区三区 精品人妻VA出轨中文字幕 中文无码AV一区二区三区 少妇激情一区二区三区视频 国产小呦泬泬99精品 全免费A级毛片免费看视频 国产精品VA在线观看无码不卡 一本大道AV伊人久久综合 香蕉久久久久久av成人 国产激情怍爱视频在线观看 无码人妻精品一区二区三区66 无码日韩精品一区二区免费暖暖 国产曰的好深好爽免费视频 日韩精品无码一本二本三本色 国产精品久久久久久麻豆一区 亚洲AV无码国产精品夜色午夜 国产手机在线精品 国产精品18久久久久久VR 樱花草视频WWW 99久久国产综合精品成人影院 麻豆一区二区99久久久久 欧美黑人又大又粗XXXXX 情侣黄网站免费看 亚洲AV日韩AV永久无码下载 精品无码AV一区二区三区 欧美人与动性XXXXX杂性 欧美XXXX做受性欧美88 人妻少妇久久中文字幕一区二区 99久久99久久精品免费看蜜桃 国语自产偷拍精品视频偷 大香煮伊区一二三四区2021 国产曰的好深好爽免费视频 精品一区二区三区在线视频 国产特级毛片AAAAAAA高清 99精品国产在热久久无码 色综合久久中文字幕无码 久久久无码一区二区三区 丝袜 亚洲 另类 欧美 变态 亚洲成AV人综合在线观看 精品久久久久久久无码人妻热 樱花草视频WWW 亚洲人成色777777在线观看 亚洲精品~无码抽插 妺妺窝人体色WWW在线下载 国产波霸爆乳一区二区 久久亚洲AV永久无码精品 性色AV一区二区三区夜夜嗨 亚洲国产精品日韩AV不卡在线 色狠狠一区二区三区香蕉 少妇高潮毛片免费看 精品久久久久久国产 国产精品国产亚洲精品看不卡 国产精品视频一区二区噜噜 精品久久久久久久无码人妻热 精品久久久久久国产 欧美精品九九99久久在免费线 中文字幕乱码人妻一区二区三区 草草久久久无码国产专区 无码人妻少妇伦在线电影 日韩欧美一区二区三区免费观看 69久久夜色精品国产69 国产精品亚洲一区二区三区 香蕉久久久久久av成人 国产精品无码免费播放 亚洲成AV人综合在线观看 青春草无码精品视频在线观看 体验区试看120秒啪啪免费 国产精品无码不卡一区二区三区 国产精品久久久久AAAA 欧美成人精品第一区二区三区 色欲AV无码一区二区三区 欧美人与动性XXXXX杂性 欧美XXXX做受老人 欧美成人精品第一区二区三区 色综合久久88色综合天天 欧洲多毛裸体XXXXX 亚洲AV日韩AV永久无码下载 日韩AV无码久久一区二区 国产精品VA在线观看无码不卡 亚洲AV综合AV一区二区三区 久久久老熟女一区二区三区 黑人粗大无码AV人妻一区 日韩人妻精品一区二区三区视频 久久精品人人做人人爽电影蜜月 天天做天天爱天天综合网2021 亚洲综合AV一区二区三区 日本特黄特色AAA大片免费 国产熟女高潮视频 无码人妻少妇伦在线电影 精品久久久久久久无码人妻热 中文字幕无码精品亚洲资源网久久 国语自产偷拍精品视频偷 久久久久成人精品无码 国产精品视频一区二区噜噜 亚洲国产精品久久久久久久 无码人妻一区二区三区免费视频 人妻少妇久久中文字幕一区二区 麻豆人妻少妇精品无码专区 欧洲熟妇色XXXX欧美老妇软件 精品久久久久久久无码人妻热 40岁成熟女人牲交片20分钟 国内揄拍国内精品少妇国语 精品久久久久久中文字幕 人妻丰满熟妇无码区免费 亚洲AV无码成人黄网站在线观看 中文字幕乱码人妻综合二区三区 亚洲精品~无码抽插 久久久久亚洲AV成人无码网站 肥臀熟女一区二区三区 久久久久久久精品国产亚洲 久久精品人人做人人爽电影蜜月 无码av人妻精品一区二区三区抖音 少妇性L交大片 亚洲精品乱码久久久久久按摩 国精无码欧精品亚洲一区 日韩精品无码观看视频免费 日韩精品久久无码中文字幕 人人做天天爱夜夜爽 国产精品久久久久久精品电影 日韩毛片无码永久免费看 成年丰满熟妇午夜免费视频 97人人模人人爽人人少妇 国产曰的好深好爽免费视频 无码A级毛片免费视频内谢 人妻少妇精品中文字幕AV 中文字幕乱码人妻综合二区三区 人妻久久久一区二区三区 国产曰的好深好爽免费视频 久久久无码一区二区三区 天天躁日日躁狠狠躁AV麻豆 99精品国产在热久久无码 丝袜 亚洲 另类 欧美 变态 中文字幕无码精品亚洲资源网久久 亚洲一区爱区精品无码 色欲久久久天天天综合网精品 国产熟女高潮视频 日韩精品久久无码中文字幕 丰满人妻熟妇乱又伦精品软件 国产精品久久久久久精品电影 无码免费一区二区三区免费播放 国产精品久久久久久麻豆一区 免费 成 人 黄 色 在线观看 成人欧美一区二区三区黑人 亚洲AV中文无码乱人伦在线R▽ 亚洲AV中文无码乱人伦在线R▽ 人体欣赏SHOWYBEAUTY 樱花草视频WWW 精品人妻大屁股白浆无码 麻豆一区二区99久久久久 无码日韩精品一区二区免费暖暖 国产欧美久久久久久精品一区二区 亚洲AV片一区二区三区 色综合久久久久久久久五月 亚洲av永久无码一区二区三区 国产精品99久久精品爆乳 最近最新高清中文字幕 色欲AV人妻精品一区二区直播 亚洲一区爱区精品无码 黑人粗大无码AV人妻一区 精品国产18久久久久久 国产精品久久久久久精品电影 成人欧美一区二区三区黑人 久久久久亚洲AV无码麻豆 中文字幕乱码人妻综合二区三区 亚洲精品无码久久毛片 色综合久久88色综合天天 无码人妻少妇伦在线电影 毛茸茸性XXXX毛茸茸毛茸茸 日韩精品无码观看视频免费 色欲久久久天天天综合网精品 肥臀熟女一区二区三区 天天躁日日躁狠狠躁AV麻豆 麻豆一区二区99久久久久 人体欣赏SHOWYBEAUTY 人妻丰满熟妇无码区免费 CHINESE熟女熟妇2乱 麻豆人妻少妇精品无码专区 久久亚洲AV永久无码精品 亚洲AV无码精品色午夜APP 亚洲国产精品久久久久久久 无码人妻一区二区三区免费视频 色五月丁香六月欧美综合 亚洲一区二区三区日本久久九 无码人妻精品一区二区三区66 久久亚洲AV永久无码精品 午夜精品一区二区三区在线观看 熟妇人妻系列AV无码一区二区 亚洲精品国产精品乱码视色 久久久久久国产A免费观看 国产精品久久久久久精品电影 国产成人无码A区在线观看视频 全免费A级毛片免费看视频 久久中文字幕人妻熟AV女 中文字幕乱码人妻综合二区三区 色综合久久久久久久久五月 国产精品久久久久久麻豆一区 亚洲成AV人综合在线观看 40岁成熟女人牲交片20分钟 久久99国产精品久久99 国产人与ZOXXXX另类 久久久久久人妻一区二区三区 亚洲熟妇无码八AV在线播放 暴力调教一区二区三区 暴力调教一区二区三区 欧洲专线一区二区三区 天天做天天爱夜夜爽 无码人妻AV一二区二区三区 久久精品麻豆日日躁夜夜躁 色综合久久中文字幕无码 99精品国产在热久久无码 久久久久夜夜夜精品国产 无码日韩精品一区二区免费暖暖 亚洲AV中文无码乱人伦在线R▽ AV无码久久久久久不卡网站 国产手机在线精品 日韩精品无码观看视频免费 精品国产一区二区三区AV 性色 久久久久久久精品国产亚洲 巨大欧美黑人XXXXBBBB 777米奇色狠狠888俺也去乱 国产熟女高潮视频 人妻少妇久久中文字幕一区二区 精品人妻大屁股白浆无码 少妇又色又紧又爽又刺激视频 亚洲AV中文无码乱人伦在线R▽ 欧美人与动性XXXXX杂性 无码人妻精品一区二区三区66 国产精品99久久精品爆乳 亚洲AV中文无码乱人伦在线R▽ 999久久久免费精品国产 亚洲人成色777777在线观看 久久久久亚洲AV成人无码网站 亚洲熟妇无码AV不卡在线播放 日本体内SHE精高潮 亚洲国产精品久久久久久久 亚洲AV无码片VR一区二区三区 天天做天天爱夜夜爽 久久久久亚洲AV成人无码网站 色欲久久久天天天综合网精品 亚洲AV无码片VR一区二区三区 免费无码毛片一区二区APP 国产精品久久久久AAAA 精精国产XXXX视频在线播放 性欧美大战久久久久久久 国产精品VIDEOSSEX久久 亚洲熟妇无码八AV在线播放 亚洲精品~无码抽插 欧洲AV无码放荡人妇网站 国产 在线 | 日韩 精品人妻无码区二区三区 亚洲AV无码一区二区一二区 丰满人妻熟妇乱又伦精品软件 国产精品视频一区二区噜噜 丰满老熟妇好大BBBBB 999久久久免费精品国产 全免费A级毛片免费看视频 精品国产A∨无码一区二区三区 香蕉久久久久久av成人 色综合久久88色综合天天 日韩精品无码一本二本三本色 中国猛少妇色XXXXX 麻豆人妻少妇精品无码专区 精品成在人线AV无码免费看 少妇又色又紧又爽又刺激视频 久久久老熟女一区二区三区 狂野欧美性猛交XXXX 国产AV无码专区亚洲精品 99精品久久久久久久婷婷 亚洲乱码一区二区三区在线观看 欧洲熟妇色XXXX欧美老妇软件 久久亚洲AV永久无码精品 制服 丝袜 亚洲 中文 综合 久久精品人人做人人爽电影蜜月 熟妇人妻系列AV无码一区二区 国产精品18久久久久久VR 人妻久久久一区二区三区 麻豆一区二区99久久久久 999久久久免费精品国产 最近最新高清中文字幕 精品国产一区二区三区AV性色 狠狠躁夜夜躁人人爽超碰97香蕉 无码人妻精品一区二区三18禁 99久久99久久精品国产片 国产精品VA在线观看无码不卡 久久久久久久亚洲AV无码 99精品人妻少妇一区二区 狠狠精品干练久久久无码中文字幕 亚洲AV中文无码乱人伦在线R▽ 精品人妻无码区二区三区 国产小呦泬泬99精品 日韩AV无码久久一区二区 色欲AV无码一区二区三区 中文字幕色AV一区二区三区 天天做天天爱天天综合网2021 久久夜色精品国产亚洲AV动态图 国产 在线 | 日韩 亚洲AV日韩AV永久无码下载 久久亚洲AV永久无码精品 中文无码AV一区二区三区 亚洲AV无码片VR一区二区三区 97人妻人人做人碰人人爽 色综合久久久久久久久五月 人人做天天爱夜夜爽 国产精品VIDEOSSEX久久 中文字幕色AV一区二区三区 无码av人妻精品一区二区三区抖音 体验区试看120秒啪啪免费 精品无码AV一区二区三区 丰满老熟妇好大BBBBB 国产精品VA在线观看无码不卡 国产成人无码A区在线观看视频 精品无码黑人又粗又大又长 久久99国产精品久久99 欧洲多毛裸体XXXXX 亚洲AV片一区二区三区 国精无码欧精品亚洲一区 国产精品国产亚洲精品看不卡 精品成在人线AV无码免费看 亚洲AV日韩AV永久无码下载 少妇XXXXX性开放 亚洲AV无码一区二区二三区入口 欧美成人精品第一区二区三区 妺妺窝人体色WWW在线观看 AV无码久久久久久不卡网站 国产A V无码专区亚洲AV 久久99精品久久久久久动态图 久久久久久AV无码免费网站下载 中文字幕色AV一区二区三区 精品人妻无码区二区三区 香蕉久久久久久av成人 日韩精品无码一区二区三区不卡 亚洲成AV人综合在线观看 制服 丝袜 亚洲 中文 综合 欧美黑人又大又粗XXXXX 久久99精品久久久久久动态图 久久久久久久久无码精品亚洲日韩 久久久久久久亚洲AV无码 久久久久亚洲精品男人的天堂 国产特级毛片AAAAAAA高清 免费无码毛片一区二区APP 国产精品VIDEOSSEX久久 亚洲国产精品无码久久久秋霞1 中文字幕无码精品亚洲资源网久久 中文无码AV一区二区三区 欧美XXXX做受性欧美88 XXXX性×XX老少配 国产精品亚洲一区二区三区 少妇性L交大片 亚洲AV成人片无码网站网 亚洲一区爱区精品无码 亚洲国产精品一区二区WWW 肥臀熟女一区二区三区 人妻VA精品VA欧美VA 欧美 国产 综合 欧美 视频 国语自产偷拍精品视频偷 樱花草视频WWW 亚洲AV无码片VR一区二区三区 久久久久亚洲精品男人的天堂 欧洲多毛裸体xxxxx 日韩精品无码一区二区三区不卡 40岁成熟女人牲交片20分钟 国产小呦泬泬99精品 99精品人妻少妇一区二区 国产精品VA在线观看无码不卡 高潮毛片无遮挡高清免费 少妇久久久久久久久久 无码AV中文字幕久久专区 国产小呦泬泬99精品 精品久久香蕉国产线看观看亚洲 成年丰满熟妇午夜免费视频 狠狠躁夜夜躁人人爽超碰97香蕉 HD老熟女BBN老淑女 AV无码久久久久久不卡网站 久久久久久久久无码精品亚洲日韩 国产 在线 | 日韩 日产精品久久久久久久性色 少妇又色又紧又爽又刺激视频 色欲国产麻豆一精品一AV一免费 久久久久亚洲AV无码麻豆 精品人妻系列无码人妻免费视频 日本特黄特色AAA大片免费 日本亲与子乱人妻HD 亚洲AV无码国产精品夜色午夜 色五月丁香六月欧美综合 亚洲av综合av一区二区三区 暴力调教一区二区三区 午夜精品一区二区三区在线观看 777米奇色狠狠888俺也去乱 免费无码一区二区三区蜜桃 久久久久亚洲AV成人片 亚洲精品~无码抽插 狂野欧美性猛交XXXX 国产精品视频一区二区噜噜 国产精品无码免费播放 国产曰的好深好爽免费视频 人妻少妇精品中文字幕AV 亚洲AV成人片无码网站网 久久久久亚洲AV成人无码网站 国偷自产一区二区免费视频 国产A V无码专区亚洲AV 精品国产A∨无码一区二区三区 国精品无码一区二区三区左线 久久久久成人精品无码 色噜噜狠狠色综合日日 国偷自产一区二区免费视频 国产一区二区精品久久 亚洲熟妇无码八AV在线播放 人妻丰满熟妇无码区免费 狠狠躁夜夜躁人人爽超碰97香蕉 99久久99久久精品免费看蜜桃 全免费A级毛片免费看视频 亚洲AV中文无码乱人伦在线咪咕 少妇久久久久久久久久 精品久久久久久无码免费 亚洲成AV人综合在线观看 亚洲国产精品无码久久久秋霞1 人妻少妇精品中文字幕AV 精品国产精品国产偷麻豆 国产精品无码AV无码 色狠狠色狠狠综合天天 亚洲熟妇无码久久精品 无码免费一区二区三区免费播放 天天做天天爱夜夜爽 亚洲AV日韩AV永久无码下载 少妇激情一区二区三区视频 国语自产偷拍精品视频偷 中文字幕无码精品亚洲资源网久久 少妇性饥渴无码A区免费 情侣黄网站免费看 国精无码欧精品亚洲一区 精品久久久久久无码免费 亚洲国产精品久久人人爱 免费人成在线观看网站 久久夜色精品国产亚洲AV动态图 毛茸茸性XXXX毛茸茸毛茸茸 色综合久久久久久久久五月 无码人妻AV一二区二区三区 AAA级久久久精品无码片 精品国产18久久久久久 日本特黄特色AAA大片免费 久久久老熟女一区二区三区 久久久久亚洲AV成人无码网站 亚洲熟妇无码久久精品 999久久久免费精品国产 人妻少妇久久中文字幕一区二区 人妻夜夜爽天天爽三区丁香花 人妻少妇AV中文字幕乱码 亚洲国产精品一区二区WWW 国产激情怍爱视频在线观看 久久精品国产99国产精品导航 日韩精品无码一本二本三本色 99精品久久久久久久婷婷 中文无码AV一区二区三区 亚洲成AV人综合在线观看 久久精品国产精品亚洲精品 久久99国产精品久久99 精品一区二区三区免费毛片爱 777米奇色狠狠888俺也去乱 久久久久亚洲精品男人的天堂 精品国产18久久久久久 丰满少妇作爱视频免费观看 丰满少妇作爱视频免费观看 色欲国产麻豆一精品一AV一免费 日日噜噜夜夜狠狠久久AV 亚洲一区二区三区AV无码 激情偷乱人伦小说视频在线 国产精品对白刺激久久久 欧洲多毛裸体XXXXX 中国猛少妇色XXXXX 少妇激情一区二区三区视频 99久久99久久精品国产片 99精品国产在热久久无码 亚洲午夜精品久久久久久浪潮 樱花草视频WWW 久久精品国产99国产精品 亚洲AV无码成人黄网站在线观看 无码人妻少妇伦在线电影 国产男女爽爽爽免费视频 漂亮人妻被黑人久久精品 巨大欧美黑人XXXXBBBB 国产精品久久久久AAAA 久久久无码精品亚洲日韩按摩 无码免费一区二区三区免费播放 色综合久久久久久久久五月 国产男女爽爽爽免费视频 亚洲AV无码片VR一区二区三区 精品人妻大屁股白浆无码 精品成在人线AV无码免费看 久久久久亚洲精品男人的天堂 亚洲熟妇AV一区二区三区 狠狠躁夜夜躁人人爽超碰97香蕉 狠狠躁夜夜躁人人爽超碰97香蕉 人妻无码第一区二区三区 亚洲精品~无码抽插 丝袜 亚洲 另类 欧美 变态 久久久无码一区二区三区 777米奇色狠狠888俺也去乱 亚洲AV无码一区二区二三区入口 精品人妻无码区二区三区 国产精品99久久精品爆乳 国产一区二区精品久久 99精品人妻少妇一区二区 久久久久夜夜夜精品国产 久久久久亚洲AV成人无码网站 777亚洲精品乱码久久久久久 欧洲专线一区二区三区 亚洲熟妇少妇任你躁在线观看无码 性欧美大战久久久久久久 丝袜 亚洲 另类 欧美 变态 男人添女人下部高潮视频 久久精品国产99国产精品 欧美精品九九99久久在免费线 肥臀熟女一区二区三区 中文字幕无码精品亚洲资源网久久 99精品人妻少妇一区二区 亚洲AV无码成人黄网站在线观看 无码人妻AV一二区二区三区 精品无码人妻一区二区三区不卡 久久久无码一区二区三区 亚洲AV中文无码乱人伦在线咪咕 国偷自产一区二区免费视频 人妻无码第一区二区三区 色综合久久中文字幕无码 久久久久夜夜夜精品国产 国产A V无码专区亚洲AV 熟妇人妻无乱码中文字幕 欧美成人精品第一区二区三区 草草久久久无码国产专区 国产波霸爆乳一区二区 AV无码久久久久久不卡网站 色狠狠一区二区三区香蕉 亚洲成AV人综合在线观看 JZZIJZZIJ亚洲乱熟无码 欧美XXXX做受老人 日产精品久久久久久久性色 国产精品无码AV无码 色欲久久久天天天综合网精品 妺妺窝人体色WWW在线下载 青春草无码精品视频在线观看 无码人妻精品一二三区免费 色狠狠一区二区三区香蕉 草草久久久无码国产专区 色综合久久88色综合天天 天天做天天爱天天综合网2021 中国猛少妇色XXXXX 妺妺窝人体色WWW在线观看 国产精品VIDEOSSEX久久 国产精品VA在线观看无码不卡 亚洲熟妇无码八AV在线播放 午夜精品久久久久久久久 AV无码久久久久久不卡网站 久久久久久精品人妻免费网站 日韩毛片无码永久免费看 久久久老熟女一区二区三区 国产精品久久久久久精品电影 国产小呦泬泬99精品 亚洲熟妇少妇任你躁在线观看无码 精品人妻无码区二区三区 人妻少妇精品中文字幕AV 国产精品视频一区二区噜噜 久久久久成人精品无码 人妻久久久一区二区三区 色欲国产麻豆一精品一AV一免费 久久久久久人妻一区二区三区 亚洲精品无码久久毛片 久久久老熟女一区二区三区 国产欧美久久久久久精品一区二区 精品一区二区三区在线视频 亚洲精品国产精品乱码视色 久久久久久AV无码免费网站下载 久久99精品久久久久久无毒不卡 色综合久久中文字幕无码 男人添女人下部高潮视频 亚洲AV片一区二区三区 中文字幕无码精品亚洲资源网久久 精品久久久久久国产 亚洲熟妇无码AV不卡在线播放 最近最新高清中文字幕 亚洲AV片一区二区三区 国精品无码一区二区三区左线 HD老熟女BBN老淑女 AV无码久久久久久不卡网站 久久精品国产99国产精品 人人做天天爱夜夜爽 日韩精品久久无码中文字幕 亚洲A∨无码一区二区三区 777米奇色狠狠888俺也去乱 亚洲av永久无码一区二区三区 久久精品国产精品亚洲精品 av无码久久久久久不卡网站 久久久久成人精品无码 色噜噜狠狠色综合日日 香蕉久久人人爽人人爽人人片AV 亚洲AV无码精品色午夜APP 国产曰的好深好爽免费视频 亚洲乱码一区二区三区在线观看 亚洲熟妇少妇任你躁在线观看无码 人妻无码第一区二区三区 国产精品视频一区二区噜噜 樱花草视频WWW 巨大欧美黑人XXXXBBBB 色偷偷88888欧美精品久久久 久久久久久AV无码免费网站下载 国产欧美久久久久久精品一区二区 69久久夜色精品国产69 性欧美大战久久久久久久 精品无码AV一区二区三区 人妻熟妇乱又伦精品视频APP 97人妻人人做人碰人人爽 人妻无码第一区二区三区 亚洲AV无码国产精品夜色午夜 国产精品国产亚洲精品看不卡 久久久久久人妻一区二区三区 免费人成在线观看网站 巨大欧美黑人XXXXBBBB 性色AV一区二区三区夜夜嗨 色综合久久久久久久久五月 精品国产18久久久久久 丰满人妻熟妇乱又伦精品软件 成人欧美一区二区三区黑人 人人妻人人添人人爽欧美一区 国产小呦泬泬99精品 激情偷乱人伦小说视频在线 人妻少妇久久中文字幕一区二区 欧洲多毛裸体xxxxx 亚洲国产精品无码久久久秋霞1 AAA级久久久精品无码片 人妻丰满熟妇无码区免费 精品久久久久久国产 免费无码一区二区三区蜜桃 亚洲精品无码永久在线观看 99久久国产综合精品成人影院 亚洲AV无码国产精品夜色午夜 人人妻人人添人人爽欧美一区 精品久久香蕉国产线看观看亚洲 久久久久久久久无码精品亚洲日韩 97人人模人人爽人人少妇 久久久久久国产A免费观看 香蕉久久久久久av成人 色欲久久久天天天综合网精品 无码人妻精品一区二区三18禁 久久久久久AV无码免费网站下载 亚洲av永久无码一区二区三区 久久99精品久久久久久动态图 久久亚洲AV永久无码精品 性欧美大战久久久久久久 精品国产一区二区三区AV 性色 国产手机在线精品 亚洲精品~无码抽插 亚洲一区二区三区日本久久九 国产 在线 | 日韩 成人区人妻精品一区二区不卡网站 亚洲国产精品日韩AV不卡在线 99精品人妻少妇一区二区 色噜噜狠狠色综合日日 国产特级毛片AAAAAAA高清 熟妇人妻无乱码中文字幕 亚洲国产精品久久久久久久 久久久久夜夜夜精品国产 无码人妻精品一区二区三区66 精品国产A∨无码一区二区三区 少妇XXXXX性开放 69久久夜色精品国产69 草草久久久无码国产专区 免费人成在线观看网站 亚洲A∨无码一区二区三区 制服 丝袜 亚洲 中文 综合 亚洲精品无码久久毛片 av无码久久久久久不卡网站 无码人妻AV一二区二区三区 精品久久久久久久无码人妻热 人体欣赏SHOWYBEAUTY 亚洲欧美日韩久久精品第一区 情侣黄网站免费看 久久久无码一区二区三区 国产精品无码不卡一区二区三区 国产精品18久久久久久VR 成年丰满熟妇午夜免费视频 精品国产18久久久久久 色噜噜狠狠色综合日日 国产免费无码一区二区视频 国产精品99久久精品爆乳 免费人成在线观看网站 欧洲多毛裸体XXXXX 国精无码欧精品亚洲一区 狠狠躁夜夜躁人人爽超碰97香蕉 色噜噜狠狠色综合日日 40岁成熟女人牲交片20分钟 亚洲国产精品无码久久久秋霞1 欧美黑人又大又粗XXXXX 久久精品麻豆日日躁夜夜躁 欧美 国产 综合 欧美 视频 亚洲熟妇无码八AV在线播放 久久久久久久久无码精品亚洲日韩 免费 成 人 黄 色 在线观看 国偷自产一区二区免费视频 亚洲精品无码久久毛片 狠狠色综合网久久久久久 亚洲国产精品久久久久久 亚洲AV中文无码乱人伦在线咪咕 亚洲一区爱区精品无码 久久久久久AV无码免费网站下载 色欲AV无码一区二区三区 国产 在线 | 日韩 99精品人妻少妇一区二区 麻豆一区二区99久久久久 久久久久久久亚洲AV无码 国产精品VIDEOSSEX久久 国内揄拍国内精品少妇国语 人人妻人人添人人爽欧美一区 久久精品国产精品亚洲精品 国产精品对白刺激久久久 97人妻人人做人碰人人爽 久久99精品久久久久久动态图 久久99国产精品久久99 精品无码黑人又粗又大又长 免费人成在线观看网站 国产精品视频一区二区噜噜 精品一区二区三区在线视频 欧美XXXX做受性欧美88 XXXX性×XX老少配 中文字幕乱码人妻综合二区三区 97人人模人人爽人人少妇 亚洲av综合av一区二区三区 亚洲av永久无码一区二区三区 久久久久久人妻一区二区三区 无码人妻AV一二区二区三区 久久久久夜夜夜精品国产 色综合久久久久久久久五月 妺妺窝人体色WWW在线下载 亚洲熟女WWW一区二区三区 人妻久久久一区二区三区 国产精品亚洲一区二区三区 精品人妻大屁股白浆无码 人人做天天爱夜夜爽 亚洲国产精品一区二区WWW 欧美黑人又大又粗XXXXX 人妻无码第一区二区三区 亚洲精品~无码抽插 久久久久成人精品无码 亚洲熟女WWW一区二区三区 亚洲欧美日韩久久精品第一区 中国猛少妇色XXXXX 国产A V无码专区亚洲AV 亚洲熟妇无码AV不卡在线播放 久久夜色精品国产亚洲AV动态图 狂野欧美性猛交XXXX 亚洲成AV人综合在线观看 国产VA免费精品观看精品 亚洲AV中文无码乱人伦在线R▽ 国产精品无码AV无码 国产A V无码专区亚洲AV 国产波霸爆乳一区二区 无码A级毛片免费视频内谢 亚洲国产精品久久久久久久 精品无码人妻一区二区三区不卡 中文字幕无码精品亚洲资源网久久 中国猛少妇色XXXXX 久久久久亚洲精品男人的天堂 亚洲av永久无码一区二区三区 日本特黄特色AAA大片免费 熟妇人妻无乱码中文字幕 人妻少妇AV中文字幕乱码 一本一本大道香蕉久在线精品 狠狠躁夜夜躁人人爽超碰97香蕉 丰满人妻熟妇乱又伦精品软件 亚洲AV中文无码乱人伦在线R▽ 无码A级毛片免费视频内谢 少妇性饥渴无码A区免费 无码av人妻精品一区二区三区抖音 日韩精品无码观看视频免费 人妻夜夜爽天天爽三区丁香花 樱花草视频WWW 久久99国产精品久久99 99久久99久久精品免费看蜜桃 亚洲一区二区三区AV无码 精品国产一区二区三区AV 性色 欧洲多毛裸体XXXXX 精品无码人妻一区二区三区不卡 体验区试看120秒啪啪免费 香蕉久久久久久av成人 国产精品对白刺激久久久 国偷自产一区二区免费视频 久久久无码精品亚洲日韩按摩 亚洲午夜精品久久久久久浪潮 欧美精品色婷婷五月综合 国精无码欧精品亚洲一区 亚洲欧美日韩久久精品第一区 亚洲熟妇AV一区二区三区 久久久久成人精品无码 成人区人妻精品一区二区不卡网站 久久久久久AV无码免费网站下载 成年丰满熟妇午夜免费视频 精品久久久久久久无码人妻热 国产精品久久久久AAAA 少妇高潮毛片免费看 国产波霸爆乳一区二区 精品无码AV一区二区三区 国精品无码一区二区三区左线 亚洲熟妇AV一区二区三区 精品无码AV一区二区三区 国产VA免费精品观看精品 午夜精品一区二区三区在线观看 精品一区二区三区自拍图片区 无码人妻精品一区二区三区66 樱花草视频WWW 色欲AV人妻精品一区二区直播 国产曰的好深好爽免费视频 日本特黄特色AAA大片免费 精品人妻无码区二区三区 草草久久久无码国产专区 国产手机在线精品 无码A级毛片免费视频内谢 精品久久久久久久无码人妻热 亚洲国产精品久久人人爱 黑人粗大无码AV人妻一区 欧洲熟妇色XXXX欧美老妇软件 精品一区二区三区在线视频 40岁成熟女人牲交片20分钟 HD老熟女BBN老淑女 精品无码人妻一区二区三区不卡 国语自产偷拍精品视频偷 99久久99久久精品免费看蜜桃 人人妻人人添人人爽欧美一区 久久精品国产99国产精品 99精品人妻少妇一区二区 色欲久久久天天天综合网精品 人妻夜夜爽天天爽三区丁香花 久久久久亚洲AV无码麻豆 无码人妻精品一区二区三区66 日韩人妻精品一区二区三区视频 久久久无码一区二区三区 日本特黄特色AAA大片免费 国产熟女高潮视频 亚洲熟妇AV一区二区三区 亚洲国产精品无码久久久秋霞1 精品国产18久久久久久 人体欣赏SHOWYBEAUTY 色狠狠一区二区三区香蕉 久久久久亚洲AV无码麻豆 香蕉久久久久久av成人 少妇激情一区二区三区视频 亚欧免费无码AⅤ在线观看 人妻丰满熟妇无码区免费 日日摸夜夜添夜夜添高潮喷水 成 人 免费 黄 色 视频 色欲AV无码一区二区三区 少妇又色又紧又爽又刺激视频 久久久久亚洲精品男人的天堂 亚洲熟妇无码久久精品 亚洲午夜精品久久久久久浪潮 夜夜爽夜夜叫夜夜高潮漏水 亚洲午夜精品久久久久久浪潮 精精国产XXXX视频在线播放 亚洲国产精品久久久久久久 欧美精品九九99久久在免费线 国精无码欧精品亚洲一区 国精无码欧精品亚洲一区 精品人妻无码区二区三区 CHINESE熟女熟妇2乱 亚洲精品无码久久毛片 亚洲国产精品无码久久久秋霞1 AAA级久久久精品无码片 亚洲一区爱区精品无码 日韩精品久久无码中文字幕 亚洲国产精品无码久久久秋霞1 亚洲国产精品无码久久久秋霞1 久久久无码精品亚洲日韩按摩 中文字幕色AV一区二区三区 免费 成 人 黄 色 在线观看 免费无码毛片一区二区APP 久久久久成人精品无码 精品久久久久久久无码人妻热 丰满老熟妇好大BBBBB 久久精品国产99国产精品导航 日产精品久久久久久久性色 亚洲国产精品久久久久久 国产激情怍爱视频在线观看 亚洲AV乱码一区二区三区林ゆな 精品久久久久久无码国产 肥臀熟女一区二区三区 人妻夜夜爽天天爽三区丁香花 久久精品人人做人人爽电影蜜月 久久精品国产99国产精品 香蕉久久久久久av成人 久久精品国产99国产精品导航 日韩精品无码一本二本三本色 精品一区二区三区在线视频 国产特级毛片AAAAAAA高清 精品久久香蕉国产线看观看亚洲 午夜精品一区二区三区在线观看 无码A级毛片免费视频内谢 夜夜爽夜夜叫夜夜高潮漏水 999久久久免费精品国产 亚洲熟妇无码八AV在线播放 欧美精品色婷婷五月综合 亚洲午夜精品久久久久久浪潮 无码人妻一区二区三区免费视频 天天做天天爱天天综合网2021 色噜噜狠狠色综合日日 国产精品视频一区二区噜噜 色欲AV人妻精品一区二区直播 高潮毛片无遮挡高清免费 色综合久久88色综合天天 久久久久久精品人妻免费网站 久久久久久久精品国产亚洲 国语自产偷拍精品视频偷 国产熟女高潮视频 国产熟女高潮视频 精品一区二区三区自拍图片区 精品人妻大屁股白浆无码 少妇又色又紧又爽又刺激视频 精品国产一区二区三区AV 性色 亚洲一区二区三区日本久久九 欧美精品色婷婷五月综合 欧洲多毛裸体xxxxx 亚洲AV无码一区二区一二区 国产激情怍爱视频在线观看 精品久久久噜噜噜久久久 亚洲A∨无码一区二区三区 日产精品久久久久久久性色 99精品人妻少妇一区二区 亚洲色大成网站WWW久久九九 无码AV中文字幕久久专区 欧美XXXX做受性欧美88 国产欧美久久久久久精品一区二区 精品无码人妻一区二区三区不卡 国产精品VIDEOSSEX久久 人妻熟妇乱又伦精品视频 成人欧美一区二区三区黑人 国产精品videossex久久 香蕉久久久久久av成人 香蕉久久人人爽人人爽人人片AV 性色AV浪潮AV色欲AV 亚洲精品WWW久久久久久 AV无码久久久久久不卡网站 久久久久久AV无码免费网站下载 性色AV一区二区三区夜夜嗨 久久久久久国产A免费观看 精品一区二区三区自拍图片区 亚洲AV无码一区二区二三区入口 免费无码毛片一区二区APP 少妇又色又紧又爽又刺激视频 国产精品VIDEOSSEX久久 无码人妻一区二区三区免费视频 中文字幕乱码人妻综合二区三区 免费人成在线观看网站 国产精品视频一区二区噜噜 日韩精品久久无码中文字幕 精品一区二区三区免费毛片爱 精品无码人妻一区二区三区不卡 亚洲精品~无码抽插 精品一区二区三区在线视频 人妻丰满熟妇无码区免费 日本体内SHE精高潮 精品国产精品国产偷麻豆 色偷偷88888欧美精品久久久 久久久久亚洲精品男人的天堂 精品成在人线AV无码免费看 久久久久亚洲AV成人无码网站 国语自产偷拍精品视频偷 国产精品VIDEOSSEX久久 亚洲国产精品无码久久久秋霞1 国偷自产一区二区免费视频 精品久久香蕉国产线看观看亚洲 性色AV浪潮AV色欲AV 亚洲熟妇AV一区二区三区 久久精品国产99国产精品 欧美 国产 综合 欧美 视频 AV无码久久久久久不卡网站 久久久久久精品人妻免费网站 亚洲熟妇无码久久精品 妺妺窝人体色WWW在线观看 人妻VA精品VA欧美VA 国产手机在线精品 HD老熟女BBN老淑女 体验区试看120秒啪啪免费 天天躁日日躁狠狠躁AV麻豆 大香煮伊区一二三四区2021 日韩毛片无码永久免费看 久久久久亚洲AV成人无码网站 国产成人无码A区在线观看视频 精品无码黑人又粗又大又长 人妻熟妇乱又伦精品视频APP 欧美XXXX做受性欧美88 亚洲人成色777777在线观看 国偷自产一区二区免费视频 亚洲AV无码成人精品国产 日韩精品久久无码中文字幕 无码人妻精品一区二区三区66 人妻VA精品VA欧美VA 精品一区二区三区自拍图片区 亚洲精品国产精品乱码视色 亚洲熟妇AV一区二区三区 无码av人妻精品一区二区三区抖音 欧美黑人又大又粗XXXXX 人人妻人人澡人人爽精品欧美 99久久国产综合精品成人影院 久久精品国产精品亚洲精品 性色AV一区二区三区天美传媒 色偷偷88888欧美精品久久久 亚洲国产精品国自产拍AV 精品久久香蕉国产线看观看亚洲 国产精品videossex久久 日韩AV无码久久一区二区 精品国产A∨无码一区二区三区 中文字幕乱码人妻综合二区三区 免费 成 人 黄 色 在线观看 国偷自产一区二区免费视频 久久99国产精品久久99 亚洲国产精品久久久久久久 欧美XXXX做受老人 香蕉久久久久久av成人 国产AV无码专区亚洲精品 日韩欧美一区二区三区免费观看 久久夜色精品国产亚洲AV动态图 国产欧美久久久久久精品一区二区 色综合久久中文字幕无码 亚洲AV综合AV一区二区三区 免费无码一区二区三区蜜桃 免费 成 人 黄 色 在线观看 色狠狠一区二区三区香蕉 性色AV一区二区三区夜夜嗨 人妻少妇精品中文字幕AV 国内揄拍国内精品少妇国语 国偷自产一区二区免费视频 色五月丁香六月欧美综合 色五月丁香六月欧美综合 国产精品亚洲一区二区三区 国产精品久久久久久麻豆一区 国产精品视频一区二区噜噜 欧美黑人又大又粗XXXXX 国语自产偷拍精品视频偷 国产男女爽爽爽免费视频 精品人妻无码区二区三区 丰满少妇作爱视频免费观看 日韩毛片无码永久免费看 日产精品久久久久久久性色 人妻少妇AV中文字幕乱码 人人做天天爱夜夜爽 国产曰的好深好爽免费视频 日韩精品无码一区二区三区不卡 色五月丁香六月欧美综合 亚洲成AV人综合在线观看 国产A V无码专区亚洲AV 亚洲精品~无码抽插 亚洲AV成人片无码网站网 人人做天天爱夜夜爽 暴力调教一区二区三区 日韩精品无码观看视频免费 HD老熟女BBN老淑女 国产精品久久久久久精品电影 国产精品18久久久久久VR 亚洲熟妇无码久久精品 欧美成人精品第一区二区三区 国产精品亚洲一区二区三区 国产精品亚洲一区二区三区 日韩精品久久无码中文字幕 亚洲AV综合AV一区二区三区 麻豆人妻少妇精品无码专区 亚洲av永久无码一区二区三区 天天躁日日躁狠狠躁AV麻豆 国偷自产一区二区免费视频 人妻少妇精品中文字幕AV 亚洲精品~无码抽插 精品一区二区三区自拍图片区 激情综合色五月丁香六月欧美 亚洲熟女综合色一区二区三区 丰满人妻熟妇乱又伦精品软件 青春草无码精品视频在线观看 国产A V无码专区亚洲AV 性色AV浪潮AV色欲AV 精品久久久噜噜噜久久久 日韩精品无码观看视频免费 少妇激情一区二区三区视频 午夜精品一区二区三区在线观看 漂亮人妻被黑人久久精品 国产精品无码AV无码 欧美精品九九99久久在免费线 人妻VA精品VA欧美VA 人妻少妇精品久久久久久 麻豆一区二区99久久久久 漂亮人妻被黑人久久精品 国产精品亚洲一区二区三区 久久夜色精品国产亚洲AV动态图 精品久久香蕉国产线看观看亚洲 亚洲AV无码国产精品夜色午夜 精品国产精品国产偷麻豆 CHINESE熟女熟妇2乱 精精国产XXXX视频在线播放 久久精品人人做人人爽电影蜜月 精品国产18久久久久久 熟妇人妻中文字幕 国产小呦泬泬99精品 国内揄拍国内精品少妇国语 少妇性L交大片 人妻丰满熟妇无码区免费 日日噜噜夜夜狠狠久久AV 97人妻人人做人碰人人爽 亚洲成AV人综合在线观看 亚洲AV无码精品色午夜APP 国精品无码一区二区三区左线 欧美XXXX做受老人 精品国产一区二区三区AV 性色 亚洲AV中文无码乱人伦在线咪咕 香蕉久久久久久av成人 情侣黄网站免费看 人妻少妇久久中文字幕一区二区 亚洲色精品AⅤ一区区三区 欧美精品色婷婷五月综合 无码人妻精品一区二区三区66 无码日韩精品一区二区免费暖暖 色综合久久中文字幕无码 人妻熟妇乱又伦精品视频APP 精品人妻系列无码人妻免费视频 国产免费无码一区二区视频 亚洲午夜精品久久久久久浪潮 CHINESE熟女熟妇2乱 色五月丁香六月欧美综合 精品人妻大屁股白浆无码 精品人妻系列无码人妻免费视频 狂野欧美性猛交XXXX 精品无码AV一区二区三区 久久久久亚洲AV成人无码网站 少妇久久久久久久久久 亚洲国产精品一区二区WWW 国产AV无码专区亚洲精品 40岁成熟女人牲交片20分钟 国产AV无码专区亚洲精品 国精品无码一区二区三区左线 日韩精品无码观看视频免费 亚洲国产精品久久久久久久 亚洲精品无码久久毛片 无码人妻少妇伦在线电影 精品久久香蕉国产线看观看亚洲 日产精品久久久久久久性色 久久久久久国产A免费观看 人妻少妇AV中文字幕乱码 久久精品国产精品亚洲精品 国产曰的好深好爽免费视频 人妻熟妇乱又伦精品视频APP 国产精品亚洲一区二区三区 亚洲午夜精品久久久久久浪潮 人体欣赏SHOWYBEAUTY 久久久无码精品亚洲日韩按摩 麻豆人妻少妇精品无码专区 亚洲国产精品一区二区WWW 国内揄拍国内精品少妇国语 免费 成 人 黄 色 在线观看 亚洲人成色777777在线观看 国产人与ZOXXXX另类 天天躁日日躁狠狠躁AV麻豆 麻豆一区二区99久久久久 久久夜色精品国产亚洲AV动态图 精品一区二区三区免费毛片爱 精品国产一区二区三区AV 性色 国产精品久久久久AAAA 狂野欧美性猛交XXXX 国产精品对白刺激久久久 国产A V无码专区亚洲AV 日韩人妻精品一区二区三区视频 日韩精品无码一区二区三区不卡 日本体内SHE精高潮 色狠狠一区二区三区香蕉 色狠狠色狠狠综合天天 少妇性饥渴无码A区免费 人妻少妇精品久久久久久 久久久久久国产A免费观看 亚洲成AV人综合在线观看 色综合久久久久久久久五月 欧洲多毛裸体xxxxx 亚洲午夜精品久久久久久浪潮 精品久久久久久中文字幕 欧美XXXX做受性欧美88 欧洲多毛裸体xxxxx 妺妺窝人体色WWW在线下载 国产精品视频一区二区噜噜 色狠狠色狠狠综合天天 欧洲专线一区二区三区 久久久久亚洲AV成人无码网站 欧洲多毛裸体xxxxx 成熟丰满熟妇高潮XXXXX 日本体内SHE精高潮 少妇性L交大片 99久久99久久精品免费看蜜桃 国产精品无码AV无码 久久久久亚洲AV成人无码网站 少妇又色又紧又爽又刺激视频 日本体内SHE精高潮 体验区试看120秒啪啪免费 亚洲精品无码久久毛片 丰满人妻熟妇乱又伦精品软件 少妇激情一区二区三区视频 亚洲AV日韩AV永久无码下载 一本大道AV伊人久久综合 亚洲人成色777777在线观看 色欲AV无码一区二区三区 久久精品麻豆日日躁夜夜躁 成人欧美一区二区三区黑人 久久久久亚洲AV成人无码网站 少妇性饥渴无码A区免费 狠狠躁夜夜躁人人爽超碰97香蕉 精品人妻VA出轨中文字幕 色综合久久中文字幕无码 精品一区二区三区自拍图片区 亚洲AV片一区二区三区 亚洲精品无码久久毛片 亚洲熟妇无码八AV在线播放 丰满人妻熟妇乱又伦精品软件 国产曰的好深好爽免费视频 亚洲AV无码成人黄网站在线观看 香蕉久久人人爽人人爽人人片AV 色狠狠一区二区三区香蕉 国产激情怍爱视频在线观看 高潮毛片无遮挡高清免费 国产一区二区精品久久 亚洲熟妇av一区二区三区 国内揄拍国内精品少妇国语 国产精品视频一区国模私拍 中文字幕色AV一区二区三区 国产精品人人做人人爽 欧美XXXX做受老人 国产精品无码不卡一区二区三区 国产特级毛片AAAAAA高清 亚洲精品无码永久在线观看 少妇XXXXX性开放 久久久久久久亚洲AV无码 国产精品人人做人人爽 色噜噜狠狠色综合日日 国产波霸爆乳一区二区 AV无码久久久久久不卡网站 精品久久久久久无码免费 亚洲av综合av一区二区三区 久久久无码一区二区三区 精精国产XXXX视频在线播放 亚洲欧美日韩久久精品第一区 精品成在人线AV无码免费看 人妻熟妇乱又伦精品视频APP 亚洲欧美日韩久久精品第一区 国产精品国产亚洲精品看不卡 人妻熟妇乱又伦精品视频APP 精品人妻无码区二区三区 国产精品视频一区二区噜噜 精品无码AV一区二区三区 久久99国产精品久久99 日本亲与子乱人妻HD 日本体内SHE精高潮 精品久久香蕉国产线看观看亚洲 少妇又色又紧又爽又刺激视频 久久精品国产99国产精品导航 黑人粗大无码AV人妻一区 最近最新高清中文字幕 日本亲与子乱人妻HD 无码人妻一区二区三区免费视频 久久久无码一区二区三区 国产小呦泬泬99精品 色综合久久88色综合天天 无码人妻AV一二区二区三区 国精品无码一区二区三区左线 日产精品久久久久久久性色 丰满人妻熟妇乱又伦精品软件 亚洲国产精品一区二区WWW 亚洲综合AV一区二区三区 精品久久久噜噜噜久久久 999久久久免费精品国产 久久久久成人精品无码 人妻少妇精品中文字幕AV 日韩人妻精品一区二区三区视频 久久久久夜夜夜精品国产 无码人妻少妇伦在线电影 久久久无码精品亚洲日韩按摩 欧洲多毛裸体xxxxx 精品国产精品国产偷麻豆 日韩人妻精品一区二区三区视频 免费人成在线观看网站 久久夜色精品国产亚洲AV动态图 亚洲国产精品久久久久久 精品无码AV一区二区三区 久久久无码一区二区三区 久久久久亚洲AV无码麻豆 性色AV一区二区三区天美传媒 亚洲熟妇无码久久精品 国内揄拍国内精品少妇国语 99精品久久久久久久婷婷 精品国产A∨无码一区二区三区 日韩精品久久无码中文字幕 一本大道AV伊人久久综合 情侣黄网站免费看 无码人妻精品一二三区免费 成人欧美一区二区三区黑人 精品人妻大屁股白浆无码 草草久久久无码国产专区 中文无码AV一区二区三区 狠狠躁夜夜躁人人爽超碰97香蕉 少妇性饥渴无码A区免费 成人区人妻精品一区二区不卡网站 国产小呦泬泬99精品 亚洲午夜精品久久久久久浪潮 熟妇人妻中文字幕 精品国产精品国产偷麻豆 中国猛少妇色XXXXX 无码人妻AV一二区二区三区 人人妻人人添人人爽欧美一区 亚洲国产精品无码久久久秋霞1 人妻熟妇乱又伦精品视频APP 亚洲国产精品一区二区WWW 国产VA免费精品观看精品 精品国产一区二区三区AV 性色 亚欧免费无码AⅤ在线观看 日韩精品无码一本二本三本色 亚洲AV无码国产精品夜色午夜 国产免费无码一区二区视频 肥臀熟女一区二区三区 人妻少妇精品中文字幕AV 欧美精品九九99久久在免费线 亚洲精品无码久久毛片 色噜噜狠狠色综合日日 777久久精品一区二区三区无码 国产精品视频一区二区噜噜 亚洲AV乱码一区二区三区林ゆな 亚洲国产精品日韩AV不卡在线 AV无码久久久久久不卡网站 97人妻人人做人碰人人爽 欧美XXXX做受性欧美88 中文字幕色AV一区二区三区 色五月丁香六月欧美综合 成人区人妻精品一区二区不卡网站 少妇又色又紧又爽又刺激视频 高潮毛片无遮挡高清免费 亚洲AV无码一区二区二三区入口 人妻久久久一区二区三区 精品国产一区二区三区AV性色 精品国产A∨无码一区二区三区 少妇XXXXX性开放 精品久久久久久无码国产 精品久久香蕉国产线看观看亚洲 国产欧美久久久久久精品一区二区 欧美精品九九99久久在免费线 亚洲午夜精品久久久久久浪潮 少妇性饥渴无码A区免费 亚洲熟女综合色一区二区三区 久久久久久精品人妻免费网站 久久久久夜夜夜精品国产 精品久久久久久无码免费 亚洲国产精品久久久久久久 亚洲熟妇无码AV不卡在线播放 亚洲精品~无码抽插 无码日韩精品一区二区免费暖暖 大香煮伊区一二三四区2021 天天做天天爱天天综合网2021 999久久久免费精品国产 麻豆一区二区99久久久久 亚洲精品~无码抽插 麻豆人妻少妇精品无码专区 亚洲精品国产精品乱码视色 国产精品视频一区二区噜噜 精品久久久久久中文字幕 人妻夜夜爽天天爽三区丁香花 日韩欧美一区二区三区免费观看 久久夜色精品国产亚洲AV动态图 成熟丰满熟妇高潮XXXXX 精品人妻无码区二区三区 性欧美大战久久久久久久 无码av人妻精品一区二区三区抖音 久久精品国产精品亚洲精品 久久久久亚洲AV成人无码网站 久久久久亚洲AV无码麻豆 无码人妻AV一二区二区三区 妺妺窝人体色WWW在线下载 精品一区二区三区自拍图片区 亚洲AV无码精品色午夜APP 色偷偷88888欧美精品久久久 毛茸茸性XXXX毛茸茸毛茸茸 精品人妻大屁股白浆无码 日本体内SHE精高潮 99久久99久久精品免费看蜜桃 国产精品久久久久久麻豆一区 亚洲精品~无码抽插 最近最新高清中文字幕 精品无码人妻一区二区三区不卡 丝袜 亚洲 另类 欧美 变态 精品久久久噜噜噜久久久 色狠狠色狠狠综合天天 狂野欧美性猛交XXXX 亚洲熟妇AV一区二区三区 999久久久免费精品国产 久久久久亚洲AV成人无码网站 午夜精品一区二区三区在线观看 国产精品99久久精品爆乳 亚欧免费无码AⅤ在线观看 97人人模人人爽人人少妇 AV无码久久久久久不卡网站 香蕉久久人人爽人人爽人人片AV 久久久久久久精品国产亚洲 少妇性饥渴无码A区免费 人妻少妇AV中文字幕乱码 亚洲熟妇无码AV不卡在线播放 国产特级毛片AAAAAAA高清 777久久精品一区二区三区无码 亚洲精品乱码久久久久久按摩 69久久夜色精品国产69 国产精品VA在线观看无码不卡 无码人妻少妇伦在线电影 精品人妻系列无码人妻免费视频 国产特级毛片AAAAAA高清 丝袜 亚洲 另类 欧美 变态 日日摸夜夜添夜夜添高潮喷水 亚欧免费无码AⅤ在线观看 亚洲熟女WWW一区二区三区 少妇性L交大片 男人添女人下部高潮视频 亚洲AV综合AV一区二区三区 樱花草视频WWW 人妻少妇久久中文字幕一区二区 久久精品麻豆日日躁夜夜躁 人妻少妇久久中文字幕一区二区 免费无码一区二区三区蜜桃 午夜精品久久久久久久久 亚洲熟妇无码AV不卡在线播放 麻豆一区二区99久久久久 亚洲AV片一区二区三区 亚洲人成色777777在线观看 精品一区二区三区在线视频 国产精品久久久久久麻豆一区 777亚洲精品乱码久久久久久 亚洲色大成网站WWW久久九九 亚洲国产精品日韩AV不卡在线 亚洲一区二区三区AV无码 99久久国产综合精品成人影院 AV无码久久久久久不卡网站 中文字幕乱码人妻一区二区三区 国产小呦泬泬99精品 色五月丁香六月欧美综合 亚洲精品~无码抽插 人妻久久久一区二区三区 精品一区二区三区免费毛片爱 夜夜爽夜夜叫夜夜高潮漏水 久久99精品久久久久久动态图 99精品久久久久久久婷婷 久久久无码精品亚洲日韩按摩 中文字幕色AV一区二区三区 国产精品视频一区二区噜噜 亚洲国产欧美一区二区三区 精品久久久噜噜噜久久久 XXXX性×XX老少配 国产精品视频一区二区噜噜 久久99精品久久久久久动态图 亚洲国产精品无码久久久秋霞1 国产精品对白刺激久久久 亚洲精品~无码抽插 亚洲国产精品日韩AV不卡在线 日韩欧美一区二区三区免费观看 少妇又色又紧又爽又刺激视频 69久久夜色精品国产69 AAA级久久久精品无码片 国偷自产一区二区免费视频 欧洲AV无码放荡人妇网站 亚洲精品~无码抽插 亚洲国产精品一区二区WWW 欧洲AV无码放荡人妇网站 人妻夜夜爽天天爽三区丁香花 大香煮伊区一二三四区2021 色综合久久中文字幕无码 日日摸夜夜添夜夜添高潮喷水 久久久无码一区二区三区 国产人与ZOXXXX另类 亚洲精品~无码抽插 久久亚洲AV永久无码精品 AV无码久久久久久不卡网站 狠狠躁夜夜躁人人爽超碰97香蕉 少妇性L交大片 人妻无码第一区二区三区 亚洲AV无码国产精品夜色午夜 AV无码久久久久久不卡网站 国产人与ZOXXXX另类 国产A V无码专区亚洲AV 中国猛少妇色XXXXX 日本特黄特色AAA大片免费 欧美XXXX做受性欧美88 亚洲AV无码成人精品国产 国产精品久久久久久麻豆一区 精品久久久久久中文字幕 亚洲AV无码片VR一区二区三区 日本熟妇色XXXXX日本免费看 久久久久亚洲AV成人无码网站 午夜精品一区二区三区在线观看 激情偷乱人伦小说视频在线 青春草无码精品视频在线观看 亚洲AV日韩AV永久无码下载 亚洲国产精品久久人人爱 久久99精品久久久久久无毒不卡 毛茸茸性XXXX毛茸茸毛茸茸 国产人与ZOXXXX另类 亚洲AV综合AV一区二区三区 漂亮人妻被黑人久久精品 夜夜爽夜夜叫夜夜高潮漏水 HD老熟女BBN老淑女 色五月丁香六月欧美综合 青春草无码精品视频在线观看 日韩人妻精品一区二区三区视频 欧洲专线一区二区三区 人体欣赏SHOWYBEAUTY AV无码久久久久久不卡网站 人妻少妇精品久久久久久 久久亚洲AV永久无码精品 人妻无码第一区二区三区 亚洲精品乱码久久久久久按摩 国产一区二区精品久久 精品国产18久久久久久 色狠狠一区二区三区香蕉 精品人妻系列无码人妻免费视频 精品国产A∨无码一区二区三区 夜夜爽夜夜叫夜夜高潮漏水 亚洲精品~无码抽插 69久久夜色精品国产69 亚洲AV乱码一区二区三区林ゆな 国产精品18久久久久久VR 久久久久久久精品国产亚洲 亚洲国产精品一区二区WWW 色综合久久久久久久久五月 精品无码AV一区二区三区 国产精品视频一区二区噜噜 成人欧美一区二区三区黑人 一本一本大道香蕉久在线精品 丰满少妇作爱视频免费观看 国产精品人人做人人爽 777米奇色狠狠888俺也去乱 精品无码黑人又粗又大又长 妺妺窝人体色WWW在线下载 亚洲AV无码一区二区一二区 亚洲国产精品久久人人爱 久久久久久久精品国产亚洲 无码人妻精品一二三区免费 国产曰的好深好爽免费视频 99久久99久久精品免费看蜜桃 男人添女人下部高潮视频 久久久久亚洲AV成人片 国偷自产一区二区免费视频 欧美精品色婷婷五月综合 国产手机在线精品 激情偷乱人伦小说视频在线 狠狠躁夜夜躁人人爽超碰97香蕉 少妇XXXXX性开放 欧美精品色婷婷五月综合 亚洲AV无码国产精品夜色午夜 亚洲国产精品日韩AV不卡在线 国内揄拍国内精品少妇国语 日本体内SHE精高潮 欧美XXXX做受老人 久久久久亚洲AV无码麻豆 久久久久久久亚洲AV无码 精品人妻无码区二区三区 精品无码AV一区二区三区 精品人妻无码区二区三区 亚洲一区二区三区AV无码 色综合久久久久久久久五月 日日摸夜夜添夜夜添高潮喷水 久久久久夜夜夜精品国产 日韩精品无码观看视频免费 欧美黑人又大又粗XXXXX 丰满老熟妇好大BBBBB 亚洲AV无码片VR一区二区三区 av无码久久久久久不卡网站 色欲AV人妻精品一区二区直播 日韩欧美一区二区三区免费观看 精品国产18久久久久久 亚洲A∨无码一区二区三区 夜夜爽夜夜叫夜夜高潮漏水 精品国产A∨无码一区二区三区 无码人妻精品一二三区免费 午夜精品一区二区三区在线观看 国产精品无码免费播放 人人做天天爱夜夜爽 少妇性L交大片 国产波霸爆乳一区二区 中文字幕乱码人妻一区二区三区 精品一区二区三区在线视频 色欲国产麻豆一精品一AV一免费 久久久久久久久无码精品亚洲日韩 色欲久久久天天天综合网精品 制服 丝袜 亚洲 中文 综合 免费 成 人 黄 色 在线观看 40岁成熟女人牲交片20分钟 无码av人妻精品一区二区三区抖音 国产精品久久久久久麻豆一区 午夜精品一区二区三区在线观看 国产精品对白刺激久久久 久久久久久久久无码精品亚洲日韩 精品人妻大屁股白浆无码 色综合久久久久久久久五月 精品久久久噜噜噜久久久 无码人妻精品一区二区三18禁 99久久99久久精品免费看蜜桃 中文字幕乱码人妻综合二区三区 国产精品久久久久久精品电影 男人添女人下部高潮视频 狠狠色综合网久久久久久 中文字幕乱码人妻综合二区三区 99久久99久久精品免费看蜜桃 日日噜噜夜夜狠狠久久AV XXXX性×XX老少配 精品人妻无码区二区三区 国产一区二区精品久久 精品国产一区二区三区AV性色 久久精品国产精品亚洲精品 精品久久久久久久无码人妻热 性色AV一区二区三区天美传媒 久久久久亚洲精品男人的天堂 人妻熟妇乱又伦精品视频APP 熟妇人妻系列AV无码一区二区 欧美黑人又大又粗XXXXX 亚洲一区爱区精品无码 无码人妻精品一区二区三18禁 国产精品无码免费播放 亚洲人成色777777在线观看 亚欧免费无码AⅤ在线观看 日韩毛片无码永久免费看 少妇又色又紧又爽又刺激视频 亚洲欧美日韩久久精品第一区 亚洲AV乱码一区二区三区林ゆな 天天躁日日躁狠狠躁AV麻豆 日本亲与子乱人妻HD 少妇激情一区二区三区视频 色狠狠色狠狠综合天天 色综合久久中文字幕无码 亚洲国产精品无码久久久秋霞1 一本大道AV伊人久久综合 丰满人妻熟妇乱又伦精品软件 欧美黑人又大又粗XXXXX 少妇又色又紧又爽又刺激视频 亚洲欧美日韩久久精品第一区 性色AV一区二区三区夜夜嗨 久久99国产精品久久99 欧美成人精品第一区二区三区 亚洲AV中文无码乱人伦在线咪咕 人妻熟妇乱又伦精品视频 色噜噜狠狠色综合日日 亚洲国产精品日韩AV不卡在线 国产A V无码专区亚洲AV 无码人妻精品一区二区三区66 免费 成 人 黄 色 在线观看 体验区试看120秒啪啪免费 久久久久亚洲精品男人的天堂 色偷偷88888欧美精品久久久 中文无码AV一区二区三区 国产A V无码专区亚洲AV 久久久久亚洲AV无码麻豆 亚洲av永久无码一区二区三区 久久久久久久精品国产亚洲 久久久久成人精品无码 亚欧免费无码AⅤ在线观看 99久久国产综合精品成人影院 日韩毛片无码永久免费看 亚洲AV中文无码乱人伦在线R▽ 精品久久久久久国产 毛茸茸性XXXX毛茸茸毛茸茸 精品久久香蕉国产线看观看亚洲 亚洲精品~无码抽插 AV无码久久久久久不卡网站 亚洲国产精品国自产拍AV 99久久99久久精品国产片 欧美精品九九99久久在免费线 国产欧美久久久久久精品一区二区 亚洲国产精品国自产拍AV 久久久久久久精品国产亚洲 性色AV浪潮AV色欲AV 亚洲午夜精品久久久久久浪潮 99精品人妻少妇一区二区 青春草无码精品视频在线观看 性色AV一区二区三区夜夜嗨 国产一区二区精品久久岳 精品国产精品国产偷麻豆 亚洲熟妇少妇任你躁在线观看无码 亚洲成AV人综合在线观看 无码日韩精品一区二区免费暖暖 亚洲综合AV一区二区三区 亚洲AV无码成人黄网站在线观看 99精品人妻少妇一区二区 国产成人无码A区在线观看视频 欧洲多毛裸体XXXXX 国产精品视频一区国模私拍 狂野欧美性猛交XXXX 少妇久久久久久久久久 99精品国产在热久久无码 国偷自产一区二区免费视频 大香煮伊区一二三四区2021 国产欧美久久久久久精品一区二区 巨大欧美黑人XXXXBBBB 国产欧美久久久久久精品一区二区 少妇久久久久久久久久 高潮毛片无遮挡高清免费 欧美精品色婷婷五月综合 JZZIJZZIJ亚洲乱熟无码 精品久久久久久久无码人妻热 少妇久久久久久久久久 久久精品麻豆日日躁夜夜躁 体验区试看120秒啪啪免费 国内揄拍国内精品少妇国语 久久久久久精品人妻免费网站 人妻熟妇乱又伦精品视频APP 国产成人无码A区在线观看视频 日韩欧美一区二区三区免费观看 妺妺窝人体色WWW聚色窝 XXXX性×XX老少配 色欲久久久天天天综合网精品 精品成在人线AV无码免费看 亚洲AV综合AV一区二区三区 99精品人妻少妇一区二区 精品久久久久久久无码人妻热 国产一区二区精品久久岳 亚洲综合AV一区二区三区 99精品人妻少妇一区二区 99精品人妻少妇一区二区 日产精品久久久久久久性色 97人人模人人爽人人少妇 色综合久久久久久久久五月 日韩精品久久无码中文字幕 国产熟女高潮视频 欧美人与动性XXXXX杂性 体验区试看120秒啪啪免费 一本一本大道香蕉久在线精品 久久中文字幕人妻熟AV女 国产成人无码A区在线观看视频 久久久久成人精品无码 久久久久亚洲精品男人的天堂 无码A级毛片免费视频内谢 人妻少妇精品中文字幕AV 日本熟妇色XXXXX日本免费看 人妻熟妇乱又伦精品视频APP 亚洲熟女综合色一区二区三区 中文字幕色AV一区二区三区 无码人妻一区二区三区免费视频 久久久久久久久无码精品亚洲日韩 日产精品久久久久久久性色 亚洲国产精品日韩AV不卡在线 少妇高潮毛片免费看 久久精品国产精品亚洲精品 亚洲av综合av一区二区三区 JZZIJZZIJ亚洲乱熟无码 久久久无码一区二区三区 国产手机在线精品 无码人妻精品一区二区三区66 无码人妻精品一区二区三18禁 久久99精品久久久久久动态图 色欲AV无码一区二区三区 亚洲av综合av一区二区三区 69久久夜色精品国产69 欧美 国产 综合 欧美 视频 人妻少妇精品中文字幕AV 成 人 免费 黄 色 视频 国产精品无码不卡一区二区三区 暴力调教一区二区三区 少妇久久久久久久久久 精品无码AV一区二区三区 久久久久久人妻一区二区三区 国产曰的好深好爽免费视频 久久久久亚洲精品男人的天堂 国产激情怍爱视频在线观看 国产精品久久久久久精品电影 精品国产18久久久久久 无码免费一区二区三区免费播放 久久亚洲AV永久无码精品 人妻少妇精品中文字幕AV 午夜精品一区二区三区在线观看 香蕉久久久久久av成人 99久久国产综合精品成人影院 亚洲国产精品国自产拍AV 国产精品久久久久久麻豆一区 精品人妻无码区二区三区 亚洲国产精品日韩AV不卡在线 亚洲AV无码国产精品夜色午夜 精品国产A∨无码一区二区三区 无码人妻少妇伦在线电影 丝袜 亚洲 另类 欧美 变态 国产A V无码专区亚洲AV 国产AV无码专区亚洲精品 亚洲A∨无码一区二区三区 妺妺窝人体色WWW在线下载 欧美 国产 综合 欧美 视频 久久久久亚洲AV无码麻豆 99久久99久久精品免费看蜜桃 男人添女人下部高潮视频 亚洲AV无码一区二区一二区 色综合久久88色综合天天 妺妺窝人体色WWW聚色窝 无码人妻精品一区二区三18禁 精品国产18久久久久久 狠狠躁夜夜躁人人爽超碰97香蕉 人妻少妇精品久久久久久 精品人妻系列无码人妻免费视频 亚洲AV无码成人黄网站在线观看 欧美 国产 综合 欧美 视频 天天躁日日躁狠狠躁AV麻豆 日韩精品无码观看视频免费 欧美成人精品第一区二区三区 亚洲AV无码国产精品夜色午夜 精品国产18久久久久久 欧美 国产 综合 欧美 视频 国精品无码一区二区三区左线 亚洲AV日韩AV永久无码下载 亚洲国产精品日韩AV不卡在线 久久精品国产99国产精品导航 亚洲AV无码成人黄网站在线观看 AAA级久久久精品无码片 亚洲AV中文无码乱人伦在线咪咕 成 人 免费 黄 色 视频 少妇性饥渴无码A区免费 色偷偷88888欧美精品久久久 国产精品18久久久久久VR 亚洲A∨无码一区二区三区 亚洲AV成人片无码网站网 巨大欧美黑人XXXXBBBB 麻豆人妻少妇精品无码专区 国产特级毛片AAAAAAA高清 亚洲AV乱码一区二区三区林ゆな 国产男女爽爽爽免费视频 国产小呦泬泬99精品 国产小呦泬泬99精品 久久亚洲AV永久无码精品 亚洲AV中文无码乱人伦在线R▽ 国语自产偷拍精品视频偷 精品无码AV一区二区三区 久久精品国产精品亚洲精品 国产男女爽爽爽免费视频 天天做天天爱天天综合网2021 色欲AV人妻精品一区二区直播 亚洲国产精品国自产拍AV 精品久久久久久久无码人妻热 色综合久久久久久久久五月 精品久久久噜噜噜久久久 国产波霸爆乳一区二区
          XXXX性×XX老少配| 无码人妻AV一二区二区三区| 性做久久久久久| 无码精品视频一区二区三区| 狠狠综合久久AV一区二区| 熟妇女人妻丰满少妇中文字幕 | 亚洲一区二区三区日本久久九| 国产精品视频一区| 精品人妻AV无码一区二区三区| 无码人妻AⅤ一区二区三区| 精品国产黑色丝袜高跟鞋| 国产97色在线 | 国产| 偷偷色噜狠狠狠狠的777米奇| 亚洲国产精品国自产拍AV| 久久久精品人妻一区二区三区蜜桃 | 无码人妻精一区二区三区| 欧美日韩精品视频一区二区三区 | 亚洲国产精品一区二区久久HS | 久久精品国产精品亚洲色婷婷 | 一本久久A久久精品亚洲| 久久国产精品久久久久久| 欧美啪啪| 我把护士日出水了视频90分钟 | 中文人妻熟妇乱又伦精品| 无码少妇一区二区性色AV| 色综合久久久久久久久五月| 国产精品视频永久免费播放| 少妇无码一区二区三区免费 | 性色AV一区二区三区天美传媒| 97性无码区免费| 亚洲成AV人片一区二区三区| 亚洲av无码一区二区二三区| 波多野结AV衣东京热无码专区| 久久久久亚洲AV成人无码网站| 粉嫩虎白女P虎白女在线| 久久久久久精品无码| 人妻AV无码一区二区三区| 国产免费AV片无码永久免费| 亚洲AV无码久久久久久精品同性| 人妻[21P]大胆| 少妇特殊按摩高潮惨叫无码| http://www.hsktsb.com http://www.yiwisi.com http://www.sitibo.com http://www.888cqsf.com http://www.woyoufenr.com http://www.024sjx.com